Protect America Simon XT Manual de instalación Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 29
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
Simon XT User Guide
24
Testing Your System
1) Your monitoring service must be placed in test mode to avoid a false alarm and dispatch of
emergency response personnel. To put your service into test mode contact Protect America by
visiting www.protectamerica.com and click for Live Chat.
The siren will sound throughout the test. Do not disarm your system before the
test is complete.
2) Close all doors and windows and make sure that the status light on your Simon XT is off.
3) Use the keypad to enter the master or a valid user code. Your display should read “System
Disarmed” or “Sub Disarmed” - this ensures that you have a working disarm code. Make sure
that you have a working code before beginning the test.
4) Arm your system: press DOORS + WINDOWS twice (
Doors +
Windows
Doors +
Windows
), then press
MOTIONS (
Motions
). Your system will stop beeping when the system is fully armed.
5) Test every sensor on your system using the chart below.
6) Disarm your system using your master or valid user code. The Simon XT should say "System
disarmed" or "Alarm cancelled."
7) Press STATUS (
Status
) to listen to all of the sensors that were activated. Listen carefully to
make sure that every sensor is mentioned. If any sensors are not mentioned, return to step 4
and re-test those sensors.
8) When your control panel has nished speaking the status, press DISARM (
Disarm
) to clear the
memory.
9) Contact Protect America to verify that signals were received and to put your monitoring service
back into active mode.
Device To Trip Device
Door/Window Sensor Open the secured door or window
Keychain Remote Press and hold both the lock and unlock button
simultaneously for two seconds.
Motion Sensor Avoid the motion sensor's area for ve minutes, then enter
its area.
Smoke Detector Press and hold the "Test" button until the system sounds.
Simon XT Emergency Buttons Press and hold each individual button for 3 seconds.
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29

Comentarios a estos manuales

Sin comentarios