Protect America Simon XT Manual de instalación Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 29
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
Simon XT User Guide
17
Arming/Disarming
Bypassing sensors
Bypassing a sensor allows you to open the sensor while the system is armed. For example, if
your
Doors & Windows are armed and you want to open your kitchen window but do not want to
disarm the entire system, then you can bypass the kitchen window sensor and then open the
kitchen window without causing an alarm. Bypassed sensors are automatically unbypassed when
the arming level is changed to a level where the sensor is not active.
The easiest way to bypass any window sensor is to make sure your system is disarmed, then
open the window(s) you want to bypass, and then arm your system. It will automatically bypass
the open window(s) and arm the rest of the sensors.
Note: If you close the bypassed window(s), the sensor(s) will automatically become active and if opened, the alarm will be triggered.
System Status
Press STATUS (no code is required) to cause the system to display and speak the following types
of information:
• Alarm conditions
• Alarm history
• Trouble conditions
• Open sensors
Bypassed sensors
The STATUS button blinks when an active alarm exists. The STATUS is lit when an abnormal
condition such as a trouble or open sensor exists in the system.
You can clear certain status entries from the system (such as old alarm history) by pressing
DISARM after checking the status.
Chimes
Use the Chime feature to signal when a protected door is opened while the system is disarmed.
The panel chimes twice when a chime sensor is tripped, if the chime mode is enabled. This
feature allows you to be notied when family members are going in and out of your home. The
Chime and Special chime features are turned on or off in the system menu.
Note: If there are no chime sensors in your system, the Chime option will not appear in the System menu.
Voice chime
Your installer may have programmed the system to speak the sensor name or make a custom
chime sound when a chime sensor is tripped. The chime sound, if programmed, will be played in
place of the standard chime beeps.
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 28 29

Comentarios a estos manuales

Sin comentarios