Protect America Simon XT Manual de instalación descargar pdf (Pagina 28)

Simon XT User Guide

Frequently Asked Questions

How do I silence the exit-delay beeps?

After arming your system, press SILENT (

Silent

). The system will beep after the exit-delay time

has passed to indicate that it is fully armed. Note: This is not a permanent setting; press SILENT

after arming each time that you want to silence the exit-delay beeps.

Why does my Simon XT have two phone lines?

The phone line labeled "Wall" is connected to the wall phone jack; it is necessary to communicate

to the monitoring station. The second phone line can be used to plug in a telephone. The Simon

XT comes equipped with an internal line grabber. Do not connect an additional line grabber to the

Simon XT.

What is bypass? How do I use it?

The bypass feature is used to bypass (deactivate) specic sensor(s) while the system is armed.

For example, you are home with the system armed and want to open a specic door or window

without disarming the entire system. To bypass a sensor press BYPASS (

Bypass

), then use the

KEYPAD to enter your master/user code. Press SCROLL UP ( ) to select the sensor to be

bypassed, then press ENTER ( ) to bypass the sensor. When a sensor is bypassed, the

panel will display "Bypassed."

Note: Bypassing a sensor only lasts until you disarm your system. You must disarm and then arm the

system to void the bypass sensors.

How do I add or remove a sensor?

To add or remove sensors, please contact customer service toll-free at 1-800-951-5111.

How do the door / window sensors work?

Doors and windows use the same piece of equipment to detect when they have been opened.

The component is comprised of a sensor and a magnet; the sensor is attached to the door or

window, while the magnet is attached to the frame. The sensor then reads alignment with the

magnet to determine the open or closed state of the door or window. If a door is constructed of

steel (not aluminum), use of the spacer is necessary to ensure proper functioning of the magnet.

Special sensors can be purchased for use with overhead garage doors (to order visit our

website at www.protectamerica.com and Live CHAT with a representative).

How do the motion sensors work?

Motion sensors are passive infrared. They will detect both heat and movement (this decreases

false-alarms that could be caused by a curtain or plant blown by a fan). Motion sensors are

designed to ignore any pets less than 40 pounds as long as they are not within 6 feet of the

motion sensor. If your pet is larger than 40 pounds or will be within 6 feet of the motion sensor,

please contact customer service toll-free at 1-800-951-5111 or visit www.protectamerica.com

and click Live CHAT.

1 2 ... 23 24 25 26 27 28 29

Sin comentarios

Protect America Simon XT Manual de instalación Pagina 28