Protect America Simon XT Manual de instalación descargar pdf (Pagina 6)

Simon XT Installation

Step 4: Chime, Clock & User Setup

Set the Clock

Press SCROLL UP ( ) until the display reads "Set Clock," and then press OK ( ).

Enter the master code, then press OK twice ( ).

If no master code has been set, the default master code is 1234.

The hour should be blinking. Type in the current hour using the KEYPAD then press OK ( ).

The minute should be blinking. Type in current minute using the KEYPAD then press OK ( ).

Press SCROLL UP ( ) to select "am" or "pm," then press OK ( ).

Press STATUS twice (

Status Status

) to return to the main menu.

USER SETUP WORKSHEET

Code Description Code

Master Code

User Code 1

User Code 2

User Code 3

User Code 4

User Code 5

User Code 6

User Code 7

User Code 8

Duress Code

Verbal Password

Emergency Contacts Name Phone 1 Phone 2

Emergency Contact 1

Emergency Contact 2

Emergency Contact 3

Turn on Chime

If the chime is on and the system is disarmed, the Simon XT panel will use voice notication when doors or windows are opened.

When the chime is on, a bell icon is shown on the display.

Press SCROLL DOWN ( ) until the display reads, "Chime," then press OK ( ).

Press SCROLL UP ( ) to select “on” or “off,” then press OK ( ).

(Note: It is recommended that the chime be turned on while installing sensors.)

Press STATUS (

Status

) to return to the main menu.

Programming the Simon XT requires keys to be pressed in order, with little or no

delay. It is recommended that you familiarize yourself with these steps before

beginning. For initial programming, the default master code is 1234 ( ).

1 2 3 4 5 6 7 8 9 10 11 ... 28 29

Sin comentarios

Protect America Simon XT Manual de instalación Pagina 6