Protect America Simon XT Manual de instalación descargar pdf (Pagina 7)

Simon XT Installation

Step 4: Chime, Clock & User Setup

Step 5: Installing Your Sensors

5.1 — Install Door & Window Sensors

Place marked sensors in their proper location. Additional sensors may be placed to your liking. When placing

sensors, make sure that the arrows on each side are aligned.

magnetsensor

Make sure that the sensor and magnet are

within 3/8" of each other. Use spacers on

metal doors or to aid proper sensor alignment.

Use the provided self-adhesive velcro to

secure the sensor to the door or window,

and the magnet to the door or window frame.

Determine an appropriate location for

each sensor.

6.5-7ft6.5-7ft

Place the motion detector in the corner of

the room, 6.5-7 feet above the ground.

Use the self-adhesive velcro to secure

the motion detector in a corner.

25 ft

Each motion detector protects up to a

25' range in a 90° arc.

5.2 — Install Motion Detector (If Included)

Motion detectors should be placed in the highest-trafc areas of your home, e.g., a living room or a hallway.

Make sure to clean the installation location before applying each sensor.

Upon installing, write the location of each sensor on the "Sensor Information

Worksheet" located on page 8 of the installation manual for future reference.

1 2 3 4 5 6 7 8 9 10 11 12 ... 28 29

Sin comentarios

Protect America Simon XT Manual de instalación Pagina 7