Protect America Simon XT Manual de instalación descargar pdf (Pagina 10)

Test Your System Monthly

1) Your monitoring service must be placed in test mode to avoid a false alarm and dispatch of emergency response

personnel. To put your service into test mode contact Protect America.

Central Monitoring Station Customer Service www.protectamerica.com/monthlytest

toll-free 1-877-274-0604 toll-free 1-800-951-5111, option 2 Click for Live Chat

24 Hrs/Day - 7 Days/Wk Standard Hours (Back Cover) Standard Hours (Back Cover)

2) Close all doors and windows and make sure that the status light on your Simon XT is off.

3) Use the keypad to enter the master or a valid user code. Your display should read “System Disarmed” or “Sub

Disarmed” - this ensures that you have a working disarm code. Make sure that you have a working code before

beginning the test.

4) Arm your system: press DOORS + WINDOWS twice (

Doors +

Windows

Doors +

Windows

), then press MOTIONS (

Motions

). Your system will

stop beeping when the system is fully armed.

5) Test every sensor on your system using the chart below.

6) Disarm your system using your master or valid user code. The Simon XT should say "System disarmed"

or "Alarm cancelled."

7) Press STATUS (

Status

) to listen to all of the sensors that were activated. Listen carefully to make sure that

every sensor is mentioned. If any sensors are not mentioned, return to step 4 and re-test those sensors.

8) When your control panel has nished speaking the status, press DISARM (

Disarm

) to clear the memory.

9) Contact Protect America to verify that signals were received and to put your monitoring service back

into active mode.

Device

Door / Window Sensor

Keychain Remote

Motion Sensor

Smoke Detector

Simon XT

Emergency Buttons

Open the secured door or window.

Press and hold both the lock and unlock buttons simultaneously

for 2 seconds.

Avoid the motion sensor’s area for five minutes, then enter its area.

Press and hold the “Test” button until the system sounds.

Press and hold each individual button for 3 seconds.

To Trip Device

BROADBAND USERS:

It is highly recommended that you connect a battery back-up (not included) to

your router and modem to prevent system failure in the event of power outage.

The siren will sound throughout the test. Do not disarm your system before the

test is complete.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Protect America Simon XT Manual de instalación Pagina 10

Comentarios a estos manuales