Protect America Simon XT Manual de usuario descargar pdf (Pagina 23)

Chapter 2

Using the control panel

Latchkey

Use the latchkey feature to notify you, via a remote phone, if a family member does not arrive home at a

predetermined time and disarm the system. When this feature is active, a latchkey alarm is reported if the

premises are not disarmed by the programmed latchkey time. For example, if you set the Latchkey time for

3:00 p.m. and the system is not disarmed by that time a message is sent to your remote phone. The latchkey

feature can be activated during arming if a latchkey time is programmed.

To activate the latchkey feature:

1. Press MOTIONS twice. If a code is required, enter your code after the first press of the MOTIONS

button, then press MOTIONS a second time.

2. The panel MOTIONS light will blink and the exit delay will begin.

Note: This feature is not verified for use by UL.

System status

Press STATUS (no code is required) to cause the system to display and speak the following types of

information:

• Alarm conditions

• Alarm history

• Trouble conditions

• Open sensors

• Bypassed sensors

The STATUS button blinks when an active alarm exists. The STATUS button is lit when an abnormal

condition such as a trouble or open sensor exists in the system.

You can clear certain status entries from the system (such as old alarm history) by pressing DISARM after

checking the status.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Sin comentarios

Protect America Simon XT Manual de usuario Pagina 23